Tools

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

Bicycle tool set in practical pouch with 89mm long bits. Includes 816 R Kraftform bit hand-holder with Rapidaptor quick-release chuck and multicomponent Kraftform handle for fatigue-free working. - Compact 13-piece screwdriving tool set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Lightweight and robust folding pouch with 12x89mm long bits - Ergonomic Kraftform bit hand-holder with Rapidaptor quick-release chuck - Rapidaptor quick-release chuck allows rapid bit change

RockShox, 11.4115.092.010, Complete service kit, 2011 Vivid Air

- Designed for precise torque and to prevent carbon fiber component damage - 1/4" drive torque wrench with chromoly ratchet head - Chrome plated chrome vanadium Hex and Torx bits (Hex: 2,2.5,3,4,5,6mm Torx: T10,T25,T30) - 100mm extension bar included

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

- Same award-winning Nano-Tech cleaner in a concentrated form - One 500ml Pouch will make 2x 1L nano-tech cleaner bottle - Can be used as a powerful degreaser in its concentrated form - Works really well in a chain cleaning device like Muc-Off X-3 - Safe on all bike parts or all bike frame materials

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

A complete tool set to work on both Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems (each sold separately). The CBP-8 includes a beefed-up bearing and crank puller and all the fittings necessary to remove and install both systems. - Bearing Puller That Fits Both Power Torque And Ultra-Torque - Crank Puller For Power Torque - Bearing Setter For Both Power Torque And Ultra-Torque - Removal Adaptor For Power Torque Crank Bearings - Removal Protection Pads For Use With Carbon Cranks - Removal Protection Adaptor For Use With Aluminum Crank Arms - Crank Removal Extension Plug For Power Torque

This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip

RockShox Dynamic Seal Grease - Recommended for rear shock service

The Muc-Off Ultimate Bicycle Cleaning Kit covers all the bases when it comes to cleaning, protecting and lubing your bike. This kit isn't style specific either with all the essentials for Road, Cyclocross, MTB and the daily commute. Complete with our award winning Bike Cleaner, Microcell Sponge, Soft Washing Brush, Detailing Brush, Two Prong Brush, Microfibre Cloth, Drivetrain Cleaner, Bike Spray and Bio Wet Lube, this kit is the perfect Birthday or Christmas gift for any bike fanatic! NB: To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use. - Nano Tech Bike Cleaner for quick, easy cleaning - Bio Drivetrain Cleaner for fast, effective drive chain degreasing - Assorted Muc-Off brushes and sponge for deep cleaning - Bike Spray for ultimate, post-wash protection - Tool Box included for convenient storage - Bio Wet Lube included for incredible drive chain efficiency - Includes Premium Microfiber Cloth for easy drying - Perfect gift for any bike lover

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades provides high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - Holding function (HF) securely holds the hexagon socket screw on the tool

Designed and built with the specific needs of the bike mechanic in mind. The RP-SET.2 includes five professional quality pliers for internal snap rings and one for external snap rings. Pliers are made from forged, heat treated cro-moly steel with a return spring and vinyl dipped grips. RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching) RP-2: 1.3mm bent internal. Opens from 22mm down to 2mm (center to center) RP-3: 1.3mm bent external. Opens from 2mm (center to center) up to 18mm RP-4: 1.7mm bent internal. Opens from 21mm down to 2mm (center to center) RP-5: 1.7mm straight internal; Opens from 25mm down to 0 (tips touching)

RockShox, 11.4118.032.001, Service kit, Vivid Air B1 (Requires Counter Measure tool)

The Muc-Off Bio Drivetrain Cleaner is a complete drivetrain cleaning solution that can either be poured into a chain cleaning device or sprayed directly to your chain rings, rear cassettes and derailleurs to clean your entire drivetrain within seconds. It's also fully biodegradable and safe for metal, plastic, rubber and seals.

Park Tool's Frame and Fork Straightener is a versatile and productive tool. Its open hook design enables it to straighten not only frames and forks, but also cranks and handlebars and it features vinyl coating on the hook and fulcrum pad to protect painted surfaces. The FFS-2's hook offers 8 inches of fore-aft adjustment and can fit a frame or fork tube of up to 1-3/4 inches in diameter.

- Redesigned TPR handles feature improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size markings, and color bands for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. - Includes: 2, 2.5, 3, 4, 5, 6, & 8mm hex and T10, T25, & T30 torx in storage pouch. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. The set is housed in a custom storage pouch and includes hex and torx sizes used day in and day out; 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, and T10, T25, and T30 torx wrenches. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.

- Includes all the parts and tools needed, just add mineral oil - Hose cutter - Two premium syringes with thread on hoses - Bleed port adaptors - Bleed blocks of 2, and 4 piston calipers - Assortment of compression nuts, olives and barbs

Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

3/8" drive Zyklop bit sockets. - Bit sockets with holding function for TORX screws - The holding function holds screws securely on the tool - With Take-it-easy tool finder: color coding by size - Knurling on lower socket end for more grip when used manually - Chrome vanadium steel, matt chrome-plated - 1x 8767 B TORX HF 1 Zyklop bit socket set with holding function, 3/8" drive, 6 pieces - 6x 8767 B HF TORX Zyklop bit socket with holding function, 3/8" drive: TX 25x107.0, TX 27x107.0, TX 30x107.0, TX 40x107.0, TX 45x100.0, TX 50x100.0 - 1x Hook-and-Loop Fastener Strip 120, 70 x 50 mm

Wera torque indicator with fixed torque for hexagon sockets. The slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and is then impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, so no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. - T-handle is ideal for transferring controlled tightening torque and high loosening torque - Error-free screwdriving due to non-slip friction clutch and exact torque transmission - Tamper-proof against accidental changing of set torque value - Corrosion-resistant blade

Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. And, this pro version is designed to stand up to heavy use with high-volume syringes and steel fittings.

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. - Kit includes 2 syringes, fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and DOT5.1 hydraulic fluid - For use with SRAM X0/ XX/ Guide/Level/Code/HydroR/G2 disc brakes - Compatible with DB-G2-R-A1, DB-G2-R-A2, DB-G2-RE-A2, DB-G2-RS-A1, DB-G2-RS-A2, DB-G2-RSC-A1, DB-G2-RSC-A2, DB-G2-ULT-A1, DB-G2-ULT-A2, DB-GDE-R-A1, DB-GDE-R-B1, DB-GDE-RE-A1, DB-GDE-RS-A1, DB-GDE-RS-B1, DB-GDE-RSC-A1, DB-GDE-RSC-B1, DB-GDE-T-A1, DB-GDE-ULT-A1, DB-LVL-A1, DB-LVL-T-A1, DB-LVL-TL-A1, DB-LVL-TLM-A1, DB-LVL-TLM-B1, DB-LVL-ULT-A1, DB-LVL-ULT-B1, DB-X0-B1, DB-XX-A2

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

A part-time universal gear integrated in the handle of the screwdriver significantly increases the working speed. The turbo function can either be switched on or off by pressing a button. Turning it off is recommended for fine adjustment and final tightening or loosening of a high torque screw. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward—allowing single-hand operation. - Quadruples the screwdriving speed in a purely mechanical way (without battery) - Activation and deactivation of the turbo function by a simple push of a button - The fixable universal gear allows powerful screwdriving and easy fine adjustments - Robust, maintenance-free gear made of steel (maximum torque 14 Nm) - 1/4" hexagon take-up with Rapidaptor quick-release chuck