Tools

- Makes the installation of hydraulic disc brake calipers quick and easy - Helps properly align a hydraulic disc brake caliper with the rotor - Ensures even spacing between disc brake pads and rotor - Compatible with all styles of hydraulic disc brakes - Durable stainless steel construction

- Used to install fork dust seals

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

• Chrome plated screwdrivers with black and gray rubber handles • 6.5mm flat screwdriver • #2 Phillips screwdriver

- Aids in the quick change of oil-bath fluid in RockShox Totem forks and for servicing/bleeding XX-Series Xloc hydraulic remote systems (Not for reverb seatposts) - Includes: Speed lube syringe+hose, adapter fittings/O-rings, And port-access wrench

Tri-Flow Synthetic Grease is specially formulated to lubricate any surface that slides, glides, rolls, twists, turns or spins. - Non-melting, waterproof formula designed to seal out water and contaminates and prevent rust and corrosion under extreme temperatures - Fully compatible with most rubbers and plastics

- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths

- Premium greyish-black grease - Great for suspension pivots, seatposts, joints, etc

- Premium red formula all-purpose bicycle grease

- Film forming lubricant designed to protect moving components and wear surfaces during assembly and initial break-in - Shields metal-To-metal contact and offers excellent rust and corrosion protection during long service periods and storage - Formulated with high levels of anti-Wear and extreme pressure additives and surface active chemistry to reduce friction. Two times zinc activates at both high and low operating temps providing unsurpassed protection. Non-Foaming

- Goes on wet to penetrate rollers and side plates, then sets up to a soft, pliable wax - Chain is encased in a waterproof layer, shielded from dirt and grime - Special low melt point wax replenishes drivetrain by slow-Feeding clean lube from the inside layers outward, significantly reducing abrasive wear and eliminating corrosion - Smooth, quiet, trouble-free operation in all conditions for long lasting protection

- Water based foaming degreaser with high solvency and clinging properties - Degreases lubricated parts quickly and effectively - Supplied with extension tube for pinpoint application

- Shop-grade tool prevents the cassette from spinning while removing the lockring - Can also be used to separate cogs on threaded multi-speed freewheels (two removers needed) - Comfort grip vinyl-coated handle

- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements

- Fits Truvativ GXP and Howitzer external-bearing bottom brackets with 16-spline/notched cups (also fits Shimano HollowTech-II bottom brackets) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces

- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid

The Origin8 Revolvr BB Cup Tool features a fiber-reinforced nylon socket for damage-free installation and removal of 16-notch BB cups. It works with 1/2-inch-drive ratchets and torque wrenches.

Bit and Socket Set for Pedro's Torque Wrenches Pedro's Pro Bit and Socket Set is designed to work with our torque wrenches, offering a full range of tools for the professional mechanic's hex, Torx, socket, and pedal needs. - Extensive set is the perfect companion for your Pedro's torque wrenches. - Includes 17 hex and Torx bits, 10 sockets, a crowfoot pedal wrench, and 3 drive adapters stored in a foam holder. - Premium S2 tool steel bits, chrome vanadium sockets, and precision laser-cut tool steel crowfoot ensure strength and lasting performance. Set includes: - Hex 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm), 10mm (65mm, 3/8" drive) - Torx T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Sockets 8, 9, 10, 11, 12, 13mm (1/4" drive), 14, 15, 17, 19mm (3/8" drive) - Crowfoot 3/8" Drive 15mm Pedal Wrench - Drive Adapters 1/4" square to 1/4" hex, 1/4" hex to 1/4" square, & 3/8" square to 1/4" hex

With its continuous and parallel jaws, the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, reducing the risk of slippage or damage. The ratchet feature ensures fast and consistent screw driving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. - The adjustable Joker 6004 covers all metric and imperial dimensions in the respective field of application - Automatic and continuous grip of hexagon screws and bolts - Lever mechanism when gripping avoids slipping and damage - Fast and consistent screwdriving without removing the wrench thanks to mechanical ratchet function - Return angle of only 30° through placement in the corner-width rectangular prisms in the mouth

High-quality bit holder. Includes a ratchet: fine-toothing with a small return angle, switchover (right, fixed, left), maximum torque of up to 50 Newton meters. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits securely. - Ratcheting screwdriver with Rapidaptor technology for rapid bit change - Ratchet with fine-pitched toothing for a low return angle - Switchover right, fixed, left - Maximum torque of up to 50 Newton meters - Multi-component Kraftform handle for fast and ergonomic screwdriving - Hard gripping zones for high working speeds, while soft zones ensure high torque transfer

- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

E-Bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers. - Slightly more slick than the original chain lube as this enables E-Bike Chain Wax to handle higher torque pressure and last longer in wet riding conditions than other wax based lubricants - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

- Installation and removal tool for press fit BB86 and BB92 bottom brackets

Durable and compact chrome-plated ratchet tool designed for bicycles. Fine-tooth ratchet with reversing lever and a fixed opening on opposite end. Tool selection optimized for road, gravel and mountain bikes. Super-hard CRV (chrome vanadium) bits. Custom, machined aluminum extension adapter with laser-etched logo. Integrated magnet holds tool bits in place. Ratchet Kit comes in a compact, soft shell carrying case. - Weight: 140g Tool Bits: - Hex 2, 2.5, 3, 4, 5, 6, 8mm - Star Shaped T10, T25, T30 - Flat Head - Phillips-Head

Holy Cow is the latest in the Rock N' Roll Lubrication's line up of chain lubes. Holy Cow is not flammable and is a very settled wet lube that is as clean or cleaner than most dry lubes. Holy Cow preforms fantastic, like the other Rock N' Roll chain lubes. However, being a little bit of a wet-style chain lube, what little dirt or grit that does get on the chain can be wiped away quickly and easily with the chain looking great again. For all you riders that like to ride with a wet lube but could live better without all the dirt and grit of a wet lube, Holy Cow is just for you.

- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits

- Two sturdy tire levers also work as a chain master link tool to remove and install chains - Includes a chain hook to make installation and removal easy - Features a valve core tool as well as a place to store a spare quick link